Today to share with you the burning brick machine hydraulic forming what matters to note.
1. The normal working temperature is between 30 ℃ ~ 60 ℃, the maximum temperature can not exceed 85 ℃,
2. The tank should always be kept clean, no debris, dust.
3. Tank oil level as required to fill the oil in place.
4. The tank should be promptly cleaned, the new one month after it is about to be cleaned, and then cleaned once every six months, about to put all the crude oil clean. After 24h precipitation by 15um filter, and then injected into the tank has been cleaned, and appropriate refueling. Never allow the contaminated base oil back into the tank, the working environment are not allowed to have dust and other debris.
5. The cooler circulating water should be sufficient, if found leaking should be handled in time, the winter cooling water should be put on net.
6. Always pay attention to the pressure gauge and solenoid valve, valve work, found to be an exception to be resolved quickly.
